- Result diameter
- 23.00 mm
- Result width
- 11.00 mm
1:24
BRM
Nissan Datsun 240Z Sharp Racing 1970 #33
Submitted by I3ull3t
Rating
0 ratings · 0 positive · 0 negative
- Article number
- BRM164
- Motor
- 19000 RPM
- Gear
- 12:33
- Length
- 170.00 mm
- Width
- 75.30 mm
- Height
- 47.00 mm
- Height chassis underside to highest point
- 45.50 mm
- Wheelbase (center to center)
- 96.00 mm
- Guide keel front → front axle
- 17.00 mm
- Guide keel position
- before the front axle
- Guide keel rear → rear axle
- 89.00 mm
- Front edge → guide keel front
- 7.00 mm
- Axle type
- Stub axle
- Motor layout
- Anglewinder
- Weight
- 132.00 g
Tyres & track
| Front | Rear | |
|---|---|---|
| Track width | 72.00 mm | 70.00 mm |
| Tyre width | 11.00 mm | 12.70 mm |
| Tyre diameter | 22.60 mm | 23.90 mm |
| Ortmann no. | — | — |
| Alternative tyres | — | — |
Wheel / tyre suggestions
The entered tyre dimensions are used to suggest similar combinations.
Quality: A = highest fit confidence, B = good fit confidence, C = usable reference.
Front
22.60 × 11.00 mm
Tuning
Other
Top 3- Result diameter
- 22.50 mm
- Result width
- 11.70 mm
- Result diameter
- 22.90 mm
- Result width
- 11.70 mm
Rear
23.90 × 12.70 mm
Tuning
Other
Top 3- Result diameter
- 23.50 mm
- Result width
- 13.00 mm
- Result diameter
- 23.50 mm
- Result width
- 13.00 mm
- Result diameter
- 24.50 mm
- Result width
- 13.00 mm
What do the measurements mean?
Sketch with all measurement points — please provide values in millimetres.
What do the measurements mean?
Sketch with all measurement points — please provide values in millimetres.
🔍 Click the sketch for a larger view.
- Length / Width / Height
- Overall vehicle dimensions, measured at the widest points.
- Wheelbase
- Center of front wheel ↔ center of rear wheel.
- Front edge -> Guide
- From the vehicle's front edge to the front edge of the guide keel.
- Guide front -> Front axle
- From the front edge of the guide keel to the center of the front axle.
- Guide rear -> Rear axle
- From the rear edge of the guide keel to the center of the rear axle.
- Track width front/rear
- Outer edge ↔ outer edge of both wheels on one axle.
- Tyre width front/rear
- Inner edge ↔ outer edge of a tyre.
- Tyre diameter front/rear
- Overall mounted tyre diameter per axle.
- Height chassis underside -> highest point
- Measure from the lowest chassis underside to the highest point of the car.
Change history
1 entries
Bjoern84 submitted 8 change(s) that were applied.
9/11/26, 2:49 PM
Show details
Hide details
Bjoern84 submitted 8 change(s) that were applied.
9/11/26, 2:49 PM
- Width: 0.00 mm → 75.30 mm
- Height chassis underside to highest point: unknown → 45.50 mm
- Front edge → guide keel front: 0.00 mm → 7.00 mm
- Guide keel front → front axle: 0.00 mm → 17.00 mm
- Guide keel rear → rear axle: unknown → 89.00 mm
- Axle type: unknown → Stub axle
- Tyre width front: unknown → 11.00 mm
- Tyre width rear: unknown → 12.70 mm
Comments & discussion
0 postsShare experiences, tips or additional information about this vehicle.
No comments yet. Be the first to contribute something about this vehicle!
Please sign in to write a comment.